OdorGuard  Carbon
Pads
 Designed
for the Removal of:
- Odors and Gaseous Pollutants
- Particulate removal is accomplished with separate
pre-filters
Features:
- Granular Carbon loadings of 300 and 600 grams/square
foot
(Equivalent to 3225 and 6450 grams/square meter)
- Suitable for Pad Holding Frames, Die Cuts, Ring
Panels or Metal Frames
- Standard and special sizes are readily available
|
|
GAC-Wt., Grams sq. ft. / sq. meter
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INITIAL RESISTANCE 300FPM / 500FPM
|
AVERAGE ARRESTANCE @500FPM
|
AVERAGE DUST HOLDING
CAPACITY (GMS)
|
RECOMMENDED FINAL RESISTANCE
(IN W.G.)
|
OdorGuard 300
PAD or DIE CUT
|
|
|
|
|
|
OdorGuard 600
PAD or DIE CUT
|
|
|
|
|
|
|
| *
OdorGuard Pads, when used as the odor removal
component, should not increase in pressure drop
during use (i.e. particulates should be collected
on pre-filters). If dust or dirt is found on these
products, it is recommended that the efficiency
level of the pre-filter be increased, changed
more frequently, or both. |
Data in accord with ANSI/ASHRAE 52.1 - 1992 test method.
Variations will occur
during production. Therefore, this data should be used
only as a guide.
|
